oase.surf - surfers world
      

Zurück   [oaseforum.de] > Hauptbereich > Kitesurfen

Kitesurfen Achtung: Bitte Vorgaben beachten!

Antwort    « Vorheriges Thema | Nächstes Thema »  
 
Themen-Optionen Ansicht
Alt 09.06.2009, 20:47   #1
zOo!
Benutzer
 
Registriert seit: 02/2008
Ort: Unnerfrangn
Beiträge: 271
zOo! eine Nachricht über ICQ schicken
Standard Oberes Schnürle der 5th element bar - Länge?

Grüß Gott,

hab mir letztens nen 5th element upgrade kit von der evo bar zugelegt eben für mein evo. So jetzt hab ich das gestern alles mal nach der anleitung hingefriemelt. Würd mal sagen: Läuft!. Aber jetzt fehlt mir des obere Schnürle. Angeblich ist das noch mal 240 cm lang? Weiß da jemand näher bescheid drüber. Wie lang muss die fünfte sein?

Im Moment sind bei mir alle Leinen gleich lang Front Back und 5te. Laut Leinenplan fehlt mir aber oben noch a stückle Leine.

Hundsverreckter Mist jetzt ist am Donnerstag schönster Wind für mein 9er gemeldet (selten hier ) und meine Bar ist unvollständig.

Gott zum Gruße...
zOo! ist offline   Mit Zitat antworten
Alt 09.06.2009, 20:53   #2
Spitfire
Benutzer
 
Registriert seit: 04/2006
Ort: Garmisch-Partenkirchen
Beiträge: 298
Standard

Servus ZOo,

hier kommt die Lösung für dein Problem( aus oberbayern )

http://www.northkites.com/public/con...index_eng.html


Normalerweise ist aber die fünfte beim kauf des Kites mitgeliefert.
Ich geh mal davon aus das du den EVO 2009 hast.
Beim North link siehst du genau wie lang deine Leine zu sein hat.

In deinem fall 270cm genau.

Grüße aus Garmisch
Spitfire ist offline   Mit Zitat antworten
Alt 09.06.2009, 20:59   #3
zOo!
Benutzer
 
Registriert seit: 02/2008
Ort: Unnerfrangn
Beiträge: 271
zOo! eine Nachricht über ICQ schicken
Standard

Servus,
danke für den Link.
nein ich hab noch den 08er. Deswegen war die wahrscheinlich auch net bei dem Upgrade-Kite dabei, wenn die mit ausgeliefert worden ist. Bei mir war jedenfalls keine dabei . Nja mir fällt scho noch was ein, hoffi doch.

Gruß
zOo! ist offline   Mit Zitat antworten
Alt 09.06.2009, 21:06   #4
frapP
PD3 in 7+9+13
 
Registriert seit: 09/2008
Ort: Hannover
Beiträge: 293
frapP eine Nachricht über ICQ schicken
Standard

Also mein 9er hatte dieses letzte teilstück das direkt am kite ist (das meinst ihr doch?) schon dran. hab den kite only gekauft. denke aber dass du das auch beim segelmacher bekommst.

EDIT:
Kann morgen bei mir nochmal nachmessen wie lang das sein muss.


Geändert von frapP (09.06.2009 um 21:09 Uhr) Grund: noch was hinzugefügt =)
frapP ist offline   Mit Zitat antworten
Alt 09.06.2009, 21:08   #5
Spitfire
Benutzer
 
Registriert seit: 04/2006
Ort: Garmisch-Partenkirchen
Beiträge: 298
Standard

Wenn du ein EVO vom letzten Jahr hast passt das Maß 270 cm natürlich nicht mehr.

Hab grad mal in dem Bedienugsheft vom letzten Jahr rein geschaut.
Mhhh da steht auch nix drin.

Ruf mal hier an oder schick den ne Email... die Antworten immer.

GERMANY
Boards & More GmbH
Tel +49 89 613009 0
Fax +49 89 613009 100
info@boards-and-more.de

Lg Patrik
Spitfire ist offline   Mit Zitat antworten
Alt 09.06.2009, 21:11   #6
tom the ripper
Gast
 
Beiträge: n/a
Standard

habe alle techn. daten von evo 08

(5th) length in cm. Material FL10
EVO 08

5 160
7 184
9 247
10 273
12 292
15 328
  Mit Zitat antworten
Alt 09.06.2009, 21:12   #7
tom the ripper
Gast
 
Beiträge: n/a
Standard

manuals zu 4+5 leiner bars findest du hier:
http://www.northkites.com/public/con...index_ger.html

die 08+09er 5th element bar hat 25m, die evo bar08 + die scepter bar 09 hat 24m

2008 EVO Kite Bar Upgrade Kit Replacement guide:

Step1:
In order to upgrade your Standard EVO 4-Line Bar with the EVO Bar 5th Line Kit you have to lay out your bar and lines first. Also unroll all lines from the Upgrade Kit and separate all bridles. Untie the front lines B1 by opening the loop up and pull the lines all the way trough until they are separated. Untie both B4 front lines from the Enter Safety Line B11. Afterwards you can connect both B4 lines again!
Proceed to disconnect the Enter Safety Line B11 from the Iron Hard B.

Standard EVO 4-Line Bar


EVO Bar 5th line Upgrade Kit


Step2:
Now we need following pats:
- Both front lines B1 red and black.
- The white front line B4.
- The metal ring
- The 2,5m long and 4mm wide, white line U5
- One small red stopper ball

Slide both B1 front lines over the white front line B4. Slide the metal ring also over this line as it is shown in the picture.
Attach the small red stopper ball to the line U5.
Make sure, that the wide stopper ball opening shows to the U5 knot.
Then feed the white line U5 trough the metal ring.


Step3:
Feed both B1 front lines trough the B4 loop. Pull the front lines all the way until they are tight.
Then lay out these two front lines as you would normally lay out your kite lines


Step 4:
Now we need following parts:
- The long blue front line U6
- One small red stopper ball
- The loop end of the 4mm white line U5

First add the red stopper ball to the U5 line. Then slide the long blue front line U6 over this line as it is shown. Pull the U6 line all the way down trough the U5 loop and make it tight.


Step 5:
Attach the short blue U2 line above the knot from line U5 by using a loop.


Step 6:
Attach the other end of the blue U2 line to the highest knot on red Enter Safety Line B11.


Step 7:
Feed the other end of the red Enter Safety Line B11 trough the Vario Cleat pulley B5.


Step 8:
Feed the red Enter Safety Line B11 trough the bar hole.
Afterwards feed the line trough the Iron Heart as well.


Step 9:
Finally make a bowline knot to receive a solid loop.
  Mit Zitat antworten
Alt 09.06.2009, 21:14   #8
Spitfire
Benutzer
 
Registriert seit: 04/2006
Ort: Garmisch-Partenkirchen
Beiträge: 298
Standard

Hey Tom,

wieso poste ich hier eigentlich noch.... du hast wohl auch alle daten im rechner oder???

Man man man respekt... weiter so... was wären wir ohne Dich.

Lg Patrik
Spitfire ist offline   Mit Zitat antworten
Alt 10.06.2009, 06:53   #9
zOo!
Benutzer
 
Registriert seit: 02/2008
Ort: Unnerfrangn
Beiträge: 271
zOo! eine Nachricht über ICQ schicken
Standard

Servus

Dankeschön Tom, genau nach dieser Anleitung hab ich es gemacht, ist auch ne anschauliche Anleitung. Jetzt für Donnerstag würd ich mir halt selber nen Schnürle hinfriemeln, dabei werd ich wohl net genau auf die 247 cm kommen ( mit Knoten etc. Hab jetzt jemanden der seinen 9er Evo eh nur als 4-leiner fliegt von dem bekomme ich nächste Woche das original Schnürle.

Macht das was aus +/- 2cm ? Mir gehts hauptsächlich darum das ich überhaupt fliegen kann, ne gewisse Auslösesicherheit sollte natürlich schon noch gegeben sein.

Gruß
zOo! ist offline   Mit Zitat antworten
Alt 10.06.2009, 11:00   #10
tom the ripper
Gast
 
Beiträge: n/a
Standard

wurscht, die 5. hängt leicht durch nur bei starken böen oder mehr gewicht spannt sie leicht, ist ja als 4 leiner konzipiert. du kannst sie aber leicht kürzen und unter leichter spannung setzen ( beim ruckartigen depowern soll sie dann gespannt sein+ beim anpowern leicht durchhängen )dann fährt er besser höhe und schluckt die böen besser was ja beim 08er bescheiden ist.
sogar der luftwiederstand alleine an der 5. genügt damit er einen tick besser höhe zieht.
  Mit Zitat antworten




Antwort


Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)
 
Themen-Optionen
Ansicht

Forumregeln
Es ist dir nicht erlaubt, neue Themen zu verfassen.
Es ist dir nicht erlaubt, auf Beiträge zu antworten.
Es ist dir nicht erlaubt, Anhänge hochzuladen.
Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.

BB-Code ist an.
Smileys sind an.
[IMG] Code ist an.
HTML-Code ist aus.

Gehe zu

Ähnliche Themen
Thema Autor Forum Antworten Letzter Beitrag
Suche North 5th Element Bar Alge Archiv - Kitesurfen [S] 0 31.12.2008 14:17
Help north 5th element bar compatibel mit carved fireball ? Pr@nA Bauen - Reparieren - Basteln 3 07.11.2008 10:42
North 5th Element Bar 2008 thunder1986 Archiv - Kitesurfen [B] 3 21.09.2008 23:38
Rhino 08 mit 5th Element Bar 2006/2007 moeglich? didier3967 Kitesurfen 1 27.05.2008 11:12
Tausche 5th element Bar OVP 27m gegen 20m oder 23m yves Archiv - Kitesurfen [S] 0 02.02.2006 11:18


Alle Zeitangaben in WEZ +1. Es ist jetzt 07:17 Uhr.


Powered by vBulletin® Version 4.2.3
Copyright ©2000 - 2024, vBulletin Solutions, Inc.